Blizzard outdoor banner
The Blizzard has a weighted plastic base which must be filled with either water or sand prior to use. Not doing this will expose the outdoor roller banner to the chance of toppling over. With a fully weight base the Blizzard outdoor roller banner will stand up to wind speeds of 13-18mph.
By using a telescopic pole for adjustable height and an adjustable slide rail for width the Blizzard offers many possibilities for the size of graphic to be used. The largest size that the Blizzard can accommodate is 800mm x 2000mm.
Blizzard banner graphics
The Blizzard comes with a single graphic. Unlike other outdoor roller banners this graphic is not stored within the base of the unit. Instead the graphic is attached using a simple eyelet system. This is rolled up and stored separately when not in use. This gives the added advantage of being able to replace the graphics on your system quickly. We are also able to provide you with replacement graphics if needed.
The Blizzard outdoor roller banner uses the same PVC that we use to print our outdoor pop up banners across the range. The PVC we use is a high quality 510gsm material which is completely weather proof. We also print with weather resistant inks that will not not run in the rain, nor fade in sunlight.
We can also design your blizzard roller banner graphics for you..
Find out more
The Blizzard is a great outdoor roller banner. It's versatility puts other more expensive banners into the shade! Even better if you order multiple sets of hardware you will receive a discount, making the banners even better value! If you do want to discuss your outdoor roller banner needs with us please don’t hesitate to call on 01625 435 130.
The visible area of the Blizzard Banner is 800mm wide x 2000mm high
Click on the following link to download a PDF with a full artwork specification -
use this specification when creating your artwork to achieve the best results when your Blizzard Banner is produced.
CLICK HERE to download artwork specification for Blizzard Banner (PDF)
Create your artwork at the actual size of the finished product, or scaled proportionally.
The best resolution for images is 100dpi at full size.
(If you work at a scaled size you need to allow for the enlargement: SO if your artwork is at 25% size then the image resolution needs to be 400dpi.)
DO NOT add bleed
DO NOT add crop/trim marks
DO NOT send artwork which floats in a larger area.
DO NOT include anything on the artwork that you do not want to be printed on the final banner.
Save a copy of your artwork to send to us. You can send:
PDF FILES - should be in pdf version 1.5 or higher, with all fonts embedded.
DO NOT SAVE DOWN TO PDF VERSION 1.3 - this is likely to reduce the quality of your artwork.
If you are using PHOTOSHOP, flatten your file and save it as a .TIF file, using LZW compression,
or as a .JPG using the HIGHEST QUALITY setting, and send this file.
No video is currently available, but the product is shipped with an easy-to-follow instruction sheet.